Bremsscheibe4246 T7

Citroën und Peugeot OE-Nummer, wie sie in Katalogen von Aftermarket-Lieferanten steht. Vergleichen Sie Angebote genau dieser Nummer und prüfen Sie vor der Bestellung Teilenummer und Fahrzeugzuordnung.

Niedrigster Aftermarket-Preis

25,63 €

zzgl. 6,95 € Versand nach Deutschland, bei AUTODOC

4 Angebote vergleichen

Reparaturanleitung: Bremsscheiben wechseln

Angebote vergleichen

Was die Suche jedes Marktplatzes für diese Nummer anzeigt, niedrigster Preis zuerst, Ovoko zuletzt. Darunter können andere Teile sein, die sie nennen.

AUTODOC

4 Angebote

Neu

Geprüft 2026-05-15 13:53 UTCAftermarket-Teile, deren Hersteller diese OE-Nummer angeben, nicht das Originalteil.

25,63 € – 33,76 €Günstigstes Angebot: RIDEX 82B0222+ 6,95 € Versand nach DeutschlandAnsehen bei AUTODOC

Ovoko

Keine Angebote

Gebraucht

Geprüft 2026-10-22 00:03 UTC

Ansehen bei Ovoko

Über Partnerlinks erhalten wir unter Umständen eine Provision. Wie wir nützlich bleiben

Aftermarket-Teilenummern

Lieferantenartikel, deren Katalog 4246 T7 nennt. Prüfen Sie vor der Bestellung die Einschränkungen des Lieferanten. Eine Einbaubedingung unter einer Teilenummer nennt deren Lieferant für mindestens eines der Fahrzeuge, für die das Teil gelistet ist, nicht für alle: Welche für ein Fahrzeug gelten, zeigt dessen Seite.

Was die Lieferanten dieser Teile angeben

Jeder Wert gehört zur Teilenummer daneben, nicht zur OE-Nummer: Teile, die dieselbe OE-Nummer nennen, können sich unterscheiden. Wo der Fahrzeughersteller einen Wert nennt, gilt dessen Wert.

Angabe	Wert und die Teilenummern mit dieser Angabe
Einbauposition	Rear Axle AISIN Q6R1920S, ATE 24.0110-0230.1, BREMBO 08.6931.10, BREMBO 08.6931.11, CHAMPION 562042CH, FERODO DDF869C +20 rear axle BLUE_PRINT ADP154345, FEBI 21122
Brake Disc Type	solid AISIN Q6R1920S, ATE 24.0110-0230.1, BLUE_PRINT ADP154345, CHAMPION 562042CH, DELPHI BG2873, DELPHI BG2873C +22 Solid BREMBO 08.6931.10, BREMBO 08.6931.11, MEYLE 11-15 523 1014
Brake disc version	Full BOSCH 0986478877
Brake Disc Thickness	10 mm AISIN Q6R1920S, ATE 24.0110-0230.1, BLUE_PRINT ADP154345, CHAMPION 562042CH, DELPHI BG2873, DELPHI BG2873C +23
Maximum thickness	10 mm BOSCH 0986478877
Minimum thickness	8 mm AISIN Q6R1920S, ATE 24.0110-0230.1, CHAMPION 562042CH, FERODO DDF869C, FTE 9072138, FTE 9082724 +18
Minimum Thickness of Brake Disc	8 mm BLUE_PRINT ADP154345, FEBI 21122
Minimum brake disc thickness	8 mm BOSCH 0986478877
Outer Diameter	290 mm CHAMPION 562042CH, DELPHI BG2873, DELPHI BG2873C, FERODO DDF869C, FTE 9072138, HELLA 8DD 355 105-231 +15 290,2 mm BLUE_PRINT ADP154345, FEBI 21122 290,5 mm TRW DF2781, VAICO V42-40011 289 mm METZGER AUTOTEILE 6110340 290.2 mm AISIN Q6R1920S 290.5 mm ATE 24.0110-0230.1 291 mm FTE 9082724
Height	60 mm AISIN Q6R1920S, ATE 24.0110-0230.1, CHAMPION 562042CH, FERODO DDF869C, FTE 9072138, FTE 9082724 +17 60.5 mm DELPHI BG2873, DELPHI BG2873C 60.1 mm METZGER AUTOTEILE 6110340
Centering Diameter	71 mm ATE 24.0110-0230.1, CHAMPION 562042CH, DELPHI BG2873, DELPHI BG2873C, FERODO DDF869C, FTE 9072138 +13 71.1 mm HELLA 8DD 355 105-231, METZGER AUTOTEILE 6110340 71.07 mm AISIN Q6R1920S
Centre Diameter	71 mm BLUE_PRINT ADP154345, FEBI 21122
Hub diameter	71,07 mm BOSCH 0986478877
Rim Hole Number	4 -Hole FTE 9072138, FTE 9082724, RAICAM RD00635, VALEO 186579, VALEO 673164, ZIMMERMANN 440.3114.20 4 VAICO V42-40011
Number of holes	4 AISIN Q6R1920S, ATE 24.0110-0230.1, BOSCH 0986478877, CHAMPION 562042CH, DELPHI BG2873, DELPHI BG2873C +13
No. of Wheel Bolt/Stud Holes	4 BLUE_PRINT ADP154345, FEBI 21122
Bolt Hole Circle Ø	108 mm AISIN Q6R1920S, ATE 24.0110-0230.1, CHAMPION 562042CH, DELPHI BG2873, DELPHI BG2873C, FTE 9072138 +9 71 mm MAGNETI MARELLI 360406041000, MAGNETI MARELLI 360406041001
Pitch Circle Diameter	108 mm BLUE_PRINT ADP154345, BOSCH 0986478877, FEBI 21122
Surface	Coated AISIN Q6R1920S, ATE 24.0110-0230.1, BLUE_PRINT ADP154345, FEBI 21122, FERODO DDF869C, FTE 9082724 +4 painted METZGER AUTOTEILE 6110340, TRW DF2781 Cross-hatch METZGER AUTOTEILE 6110340 Oiled DELPHI BG2873 UV paint coated MAGNETI MARELLI 360406041001
Surface type	oiled BOSCH 0986478877
Test Mark	ECE-R90 FTE 9072138, FTE 9082724, VALEO 186579, VALEO 673164 R90 Homologated DELPHI BG2873, DELPHI BG2873C, FERODO DDF869C, JURID 562042JC K.B.A.: 61210 KAWE 6498 00, ROADHOUSE 6498.00, WOKING D6498.00 E1 90R-02 C0204/0559 TRW DF2781 E1 90R-02C0248/0754 ATE 24.0110-0230.1 ECE R90 APPROVED ZIMMERMANN 440.3114.20
Contains screws	Yes BOSCH 0986478877
Supplementary Article/Supplementary Info 2	with bolts/screws FERODO DDF869C, JURID 562042JC, MAGNETI MARELLI 360406041000, MAGNETI MARELLI 360406041001, METZGER AUTOTEILE 6110340, TRW DF2781 +1 without bolts/screws CHAMPION 562042CH, STELLOX 6020-3721-SX, VALEO 186579, VALEO 673164 without ABS sensor ring FTE 9082724, VALEO 186579, VALEO 673164 without integrated wheel bearing FTE 9082724, VALEO 186579, VALEO 673164 without wheel hub HELLA 8DD 355 105-231 without wheel studs HELLA 8DD 355 105-231 with screw FTE 9072138

AISIN: Q6R1920SBrake Disc Type: solid Surface: Coated Outer Diameter: 290.2 mm Brake Disc Thickness: 10 mm Height: 60 mm Centering Diameter: 71.07 mm Minimum thickness: 8 mm Weight: 5.22 kg Number of Holes: 4 Bolt Hole Circle Ø: 108 mm
+7 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:Construction Year to: 03.1999, 07.1999, 03.2003 Construction Year from: 08.1997, 09.2000
ATE: 24.0110-0230.1Outer Diameter: 290.5 mm Brake Disc Thickness: 10 mm Minimum thickness: 8 mm Brake Disc Type: solid Number of Holes: 4 Surface: Coated Bolt Hole Circle Ø: 108 mm Height: 60 mm Centering Diameter: 71 mm Inner Diameter: 185 mm Bore Diameter: 13 mm Test Mark: E1 90R-02C0248/0754
+9 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:Construction Year to: 08.2001, 04.2004 Construction Year from: 02.1999
BLUE_PRINT: ADP154345Brake Disc Thickness: 10 mm Brake Disc Type: solid Centre Diameter: 71 mm Height or Thickness: 60 mm Minimum Thickness of Brake Disc: 8 mm No. of Fixing Holes: 3 No. of Wheel Bolt/Stud Holes: 4 Outer Diameter: 290,2 mm Pitch Circle Diameter: 108 mm Surface: Coated
+7 weitereWeniger anzeigen
Einbauposition: rear axleEinbaubedingungen:Vehicle Identification Number (VIN) from: *********80012041
BOSCH: 0986478877Height (unpacked): 60 mm Diameter (unpacked): 290,5 mm Number of holes: 4 Meets manufacturer standards / specifications: ECE-R90 Hub diameter: 71,07 mm Maximum thickness: 10 mm Minimum brake disc thickness: 8 mm Hub diameter fitting: H9 Pitch circle diameter: 108 mm Contains screws: Yes Additional information: with bolts Surface type: oiled Brake disc version: Full Maximum mounting hole diameter: 13,2 mm
+11 weitereWeniger anzeigen
BREMBO: 08.6931.10Diameter Ø: 290 mm Thickness (TH): 10 mm Height (A): 60 mm Number of holes (C): 4 Brake disc type: Solid Centering (B): 71 mm Min. thickness: 8 mm Tightening torque: 90 Nm Units per box: 2
+6 weitereWeniger anzeigen
Einbauposition: Rear Axle08.6931.11Diameter Ø: 290 mm Thickness (TH): 10 mm Height (A): 60 mm Number of holes (C): 4 Brake disc type: Solid Centering (B): 71 mm Min. thickness: 8 mm Tightening torque: 90 Nm Units per box: 2
+6 weitereWeniger anzeigen
Einbauposition: Rear Axle
CHAMPION: 562042CHBrake Disc Type: solid Outer Diameter: 290 mm Brake Disc Thickness: 10 mm Supplementary Article/Supplementary Info 2: without bolts/screws Height: 60 mm Bolt Hole Circle Ø: 108 mm Centering Diameter: 71 mm Number of Holes: 4 Quantity Unit: Set Weight: 10.66 kg Minimum thickness: 8 mm Tightening Torque: 90 Nm Container Type: Carton Packaging length: 29 cm Packaging width: 29 cm Packaging height: 12.4 cm
+13 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:paired article number: 571899CH Construction Year from: 10.2000
DELPHI: BG2873Brake Disc Type: solid Number of Holes: 4 Test Mark: R90 Homologated Surface: Oiled Outer Diameter: 290 mm Brake Disc Thickness: 10 mm Bolt Hole Circle Ø: 108 mm Centering Diameter: 71 mm Height: 60.5 mm
+6 weitereWeniger anzeigen
ersetzt DELPHI BG2873CBG2873CBrake Disc Type: solid Number of Holes: 4 Test Mark: R90 Homologated Outer Diameter: 290 mm Brake Disc Thickness: 10 mm Bolt Hole Circle Ø: 108 mm Centering Diameter: 71 mm Height: 60.5 mm
+5 weitereWeniger anzeigen
ersetzt durch DELPHI BG2873
FEBI: 21122Brake Disc Thickness: 10 mm Brake Disc Type: solid Centre Diameter: 71 mm Height or Thickness: 60 mm Minimum Thickness of Brake Disc: 8 mm No. of Fixing Holes: 3 No. of Wheel Bolt/Stud Holes: 4 Outer Diameter: 290,2 mm Pitch Circle Diameter: 108 mm Surface: Coated
+7 weitereWeniger anzeigen
Einbauposition: rear axleEinbaubedingungen:Vehicle Identification Number (VIN) from: *********80012041
FERODO: DDF869CBrake Disc Type: solid Outer Diameter: 290 mm Brake Disc Thickness: 10 mm Supplementary Article/Supplementary Info 2: with bolts/screws Height: 60 mm Centering Diameter: 71 mm Number of Holes: 4 Quantity Unit: Piece Surface: Coated Test Mark: R90 Homologated Weight: 5.33 kg Minimum thickness: 8 mm Tightening Torque: 90 Nm Packaging length: 30 cm Packaging width: 30 cm Packaging height: 11 cm
+13 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:Construction Year from: 10.2000
FTE: 9072138Brake Disc Type: solid Outer Diameter: 290 mm Brake Disc Thickness: 10 mm Centering Diameter: 71 mm Height: 60 mm Minimum thickness: 8 mm Bolt Hole Circle Ø: 108 mm Rim Hole Number: 4 -Hole Number of mounting bores: 2 Supplementary Article/Supplementary Info 2: with screw No. of holes 1: 1 Test Mark: ECE-R90 Weight: 5.235 kg
+10 weitereWeniger anzeigen
Einbauposition: Rear Axle9082724Brake Disc Type: solid Surface: Coated Outer Diameter: 291 mm Brake Disc Thickness: 10 mm Height: 60 mm Minimum thickness: 8 mm Rim Hole Number: 4 -Hole Number of mounting bores: 2 No. of holes 1: 1 Supplementary Article/Supplementary Info 2: without ABS sensor ring Supplementary Article/Supplementary Info 2: without integrated wheel bearing Test Mark: ECE-R90 Weight: 10.76 kg
+10 weitereWeniger anzeigen
Einbauposition: Rear Axle
HELLA: 8DD 355 105-231Brake Disc Type: solid Outer Diameter: 290 mm Brake Disc Thickness: 10 mm Height: 60 mm Minimum thickness: 8 mm Surface: Coated Bolt Hole Circle Ø: 108 mm Centering Diameter: 71.1 mm Hole Arrangement/Number: 04/07 Supplementary Article/Supplementary Info 2: without wheel hub Supplementary Article/Supplementary Info 2: without wheel studs Weight: 5.2 kg
+9 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:Manufacturer Restriction: Teves Vehicle Identification Number (VIN) from: 80 012 041
JURID: 562042JCBrake Disc Type: solid Outer Diameter: 290 mm Brake Disc Thickness: 10 mm Required quantity: 1 Supplementary Article/Supplementary Info 2: with bolts/screws Version: JC Height: 60 mm Bolt Hole Circle Ø: 108 mm Centering Diameter: 71 mm Number of Holes: 4 Quantity Unit: Set Surface: Coated Test Mark: R90 Homologated Weight: 10.66 kg Minimum thickness: 8 mm Tightening Torque: 90 Nm Container Type: Carton Packaging length: 31 cm Packaging width: 31 cm Packaging height: 14 cm
+17 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:article number of recommended accessories: 571899J Construction Year from: 10.2000
KAWE: 6498 00Diameter: 290 mm Weight: 5.18 kg Brake Disc Type: solid Minimum thickness: 8 mm Brake Disc Thickness: 10 mm Number of Holes: 4 Test Mark: K.B.A.: 61210 Height: 60 mm Centering Diameter: 71 mm Outer Diameter: 290 mm
+7 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:Construction Year from: 10.1997, 02.1999, 05.1999, 06.1999 Construction Year to: 03.1999, 04.1999, 12.1999
MAGNETI MARELLI: 360406041000Brake Disc Type: solid Diameter: 290 mm Height: 60 mm Minimum thickness: 8 mm Number of Holes: 4 Bolt Hole Circle Ø: 71 mm Tightening Torque: 90 Nm Supplementary Article/Supplementary Info 2: with bolts/screws Brake Disc Thickness: 10 mm Outer Diameter: 290 mm
+7 weitereWeniger anzeigen
Einbauposition: Rear Axleersetzt durch MAGNETI MARELLI 360406041001360406041001Surface: UV paint coated Brake Disc Type: solid Diameter: 290 mm Height: 60 mm Minimum thickness: 8 mm Number of Holes: 4 Bolt Hole Circle Ø: 71 mm Tightening Torque: 90 Nm Supplementary Article/Supplementary Info 2: with bolts/screws Brake Disc Thickness: 10 mm Outer Diameter: 290 mm
+8 weitereWeniger anzeigen
Einbauposition: Rear Axleersetzt MAGNETI MARELLI 360406041000
METZGER AUTOTEILE: 6110340Brake Disc Type: solid Surface: painted Surface: Cross-hatch Outer Diameter: 289 mm Brake Disc Thickness: 10 mm Minimum thickness: 8 mm Number of Holes: 4 Bolt Hole Circle Ø: 108 mm Height: 60.1 mm Centering Diameter: 71.1 mm Inner Diameter: 167 mm Supplementary Article/Supplementary Info 2: with bolts/screws
+9 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:Brake System: ATE Vehicle Identification Number (VIN) from: 80012041
MEYLE: 11-15 523 1014Outer Diameter: 290 mm Height: 60 mm Brake Disc Thickness: 10 mm Centering Diameter: 71 mm Bolt Hole Circle Ø: 108 mm Wheel Bolt Bore Diameter: 13 mm Number of Holes: 4 Brake Disc Type: Solid Required quantity: 2 Minimum thickness: 8 mm
+7 weitereWeniger anzeigen
Einbauposition: Rear Axle
RAICAM: RD00635Brake Disc Thickness: 10 mm Minimum thickness: 8 mm Height: 60 mm Outer Diameter: 290 mm Weight: 5.2 kg Centering Diameter: 71 mm Brake Disc Type: solid fulfils ECE standard: E1 Rim Hole Number: 4 -Hole
+6 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:for OE number: 4246T6
REMSA: 6498.00Diameter: 290 mm Height: 60 mm Brake Disc Type: solid Brake Disc Thickness: 10 mm Minimum thickness: 8 mm Number of Holes: 4 Centering Diameter: 71 mm Weight: 5.18 kg Outer Diameter: 290 mm
+6 weitereWeniger anzeigen
Einbauposition: Rear Axle
ROADHOUSE: 6498.00Test Mark: K.B.A.: 61210 Weight: 5.18 kg Diameter: 290 mm Brake Disc Thickness: 10 mm Minimum thickness: 8 mm Height: 60 mm Centering Diameter: 71 mm Number of Holes: 4 Brake Disc Type: solid Outer Diameter: 290 mm
+7 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:Construction Year from: 10.1997, 02.1999, 05.1999, 06.1999 Construction Year to: 03.1999, 04.1999, 12.1999
STELLOX: 6020-3721K-SXOuter Diameter: 290 mm Brake Disc Thickness: 10 mm Brake Disc Type: solidEinbauposition: Rear Axle6020-3721-SXOuter Diameter: 290 mm Brake Disc Thickness: 10 mm Height: 60 mm Centering Diameter: 71 mm Number of Holes: 4 Bolt Hole Circle Ø: 108 mm Bore Diameter: 13 mm Minimum thickness: 8 mm Brake Disc Type: solid Supplementary Article/Supplementary Info 2: without bolts/screws
+7 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:Construction Year to: 03.1999, 12.1999, 08.2001, 04.2004 Braking/Driving Dynamics: for vehicles with ABS Construction Year from: 10.1997, 02.1999, 05.1999, 06.1999
TRW: DF2781Surface: painted Brake Disc Type: solid Outer Diameter: 290,5 mm Brake Disc Thickness: 10 mm Minimum thickness: 8 mm Centering Diameter: 71 mm Height: 60 mm Number of Holes: 4 Thread Size: 13 Bolt Hole Circle Ø: 108 mm Drum diameter: 185 mm Colour: black Supplementary Article/Supplementary Info 2: with bolts/screws Test Mark: E1 90R-02 C0204/0559
+11 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:Braking/Driving Dynamics: for vehicles with ABS Construction Year to: 199903, 200405 Construction Year from: 200009
VAICO: V42-40011Rim Hole Number: 4 Height: 60 mm Brake Disc Type: solid Brake Disc Thickness: 10 mm Outer diameter: 290,5 mm Centering Diameter: 71 mm Bolt Hole Circle Ø: 108 mm Brake Disc Hub Height: 50 mm Minimum thickness: 8 mm
+6 weitereWeniger anzeigen
VALEO: 186579Brake Disc Type: solid Outer Diameter: 290 mm Brake Disc Thickness: 10 mm Centering Diameter: 71 mm Height: 60 mm Minimum thickness: 8 mm Rim Hole Number: 4 -Hole Number of mounting bores: 2 Supplementary Article/Supplementary Info 2: without bolts/screws No. of holes 1: 1 Supplementary Article/Supplementary Info 2: without ABS sensor ring Supplementary Article/Supplementary Info 2: without integrated wheel bearing Test Mark: ECE-R90 Weight: 10.76 kg
+11 weitereWeniger anzeigen
Einbauposition: Rear Axle673164Brake Disc Type: solid Surface: Coated Outer Diameter: 290 mm Brake Disc Thickness: 10 mm Height: 60 mm Minimum thickness: 8 mm Rim Hole Number: 4 -Hole Number of mounting bores: 2 Supplementary Article/Supplementary Info 2: without bolts/screws No. of holes 1: 1 Supplementary Article/Supplementary Info 2: without ABS sensor ring Supplementary Article/Supplementary Info 2: without integrated wheel bearing Test Mark: ECE-R90 Weight: 10.76 kg
+11 weitereWeniger anzeigen
Einbauposition: Rear Axle
WOKING: D6498.00Test Mark: K.B.A.: 61210 Diameter: 290 mm Brake Disc Thickness: 10 mm Minimum thickness: 8 mm Height: 60 mm Centering Diameter: 71 mm Number of Holes: 4 Brake Disc Type: solid Weight: 5.18 kg Outer Diameter: 290 mm
+7 weitereWeniger anzeigen
Einbauposition: Rear AxleEinbaubedingungen:Construction Year from: 10.1997, 02.1999, 05.1999, 06.1999 Construction Year to: 03.1999, 04.1999, 12.1999
ZentParts: Z06033Supplementary Article/Supplementary Info 2: with bolts/screws Brake Disc Type: solid Height: 60 mm Bolt Hole Circle Ø: 108 mm Brake Disc Thickness: 10 mm Number of Holes: 4 Bore Diameter: 13 mm Centering Diameter: 71 mm Minimum thickness: 8 mm Outer Diameter: 290 mm
+7 weitereWeniger anzeigen
Einbauposition: Rear Axle
ZIMMERMANN: 440.3114.20Brake Disc Type: solid Surface: Coated Outer Diameter: 290 mm Brake Disc Thickness: 10 mm Height: 60 mm Rim Hole Number: 4 -Hole Bolt Hole Circle Ø: 108 mm Centering Diameter: 71 mm Test Mark: ECE R90 APPROVED Minimum thickness: 8 mm Hole Arrangement/Number: 6/4 Weight: 5.2 kg
+9 weitereWeniger anzeigen
Einbauposition: Rear Axle

Fahrzeugzuordnung

Motorcode und Bauzeitraum entscheiden über die Passung. Modellname und Baujahr allein reichen nicht.

65 Fahrzeuge in 3 Modellreihen, abgeleitet

Aftermarket-Teile, die 4246 T7 nennen, passen laut ihren Lieferantenkatalogen zu diesen Fahrzeugen. Das beweist nicht, dass 4246 T7 selbst zu jedem passt: Prüfen Sie Motorcode, Bauzeitraum und die Einschränkungen des Lieferanten auf den Fahrzeugseiten der Modellreihe.

Peugeot

3 Modellreihen · 65 Fahrzeuge

Peugeot: aus Aftermarket-Teilen abgeleitete Modellreihen
Modellreihe	Bauzeit	Motorcodes	HSN / TSN
40633 Fahrzeuge	08/1995 – 10/2004	DW10ATED (RHZ), DW10TD (RHY), DW12TED4 (4HX), ES9J4S (XFX), ES9J4 (XFZ), EW10D (RLZ), EW10J4 (RFN), EW10J4 (RFR), EW12J4 (3FZ), EW7J4 (6FZ), L6A, LFY, R6E, RGX, RHS, XFX, XU10J2TE (RGX), XU10J2TE (RGY), XU10J4R (RFV), XU5JP (BFZ), XU7JB (LFX), XU7JP4 (LFY), XU7JP (LFZ), XUD11BTE (P8C), XUD9SD (DHW), XUD9TE (D8B), XUD9TE (DHX), XUD9TE (DHY)	3003 / 515, 525, 536, 549, 551, 770, 771, 772, 773, 792, 803, 807, 856, 873, 886, 888, 894, 897
406 Coupé12 Fahrzeuge	03/1997 – 02/2005	DW12TED4 (4HX), ES9J4S (XFX), ES9J4 (XFZ), EW10J4 (RFN), EW10J4 (RFR), EW12J4 (3FZ), RFV, XFX, XU10J4R (RFV), XU7JP4 (LFY)	3003 / 517, 538, 571, 819, 890, 899
406 SW20 Fahrzeuge	10/1996 – 10/2004	DW10ATED (RHZ), DW10TD (RHY), DW12TED4 (4HX), ES9J4S (XFX), ES9J4 (XFZ), EW10D (RLZ), EW10J4 (RFN), EW10J4 (RFR), EW12J4 (3FZ), EW7J4 (6FZ), RGX, XU10J2TE (RGX), XU10J2TE (RGY), XU10J4R (RFV), XU7JB (LFX), XU7JP4 (LFY), XU7JP (LFZ), XUD11BTE (P8C), XUD9SD (DHW), XUD9TE (DHX)	3003 / 516, 526, 537, 550, 552, 800, 801, 802, 804, 805, 806, 808, 857, 874, 887, 889, 895, 898