Brake Disc34 21 1 164 129

BMW OE number, as listed in aftermarket supplier catalogues. Compare listings for this exact number, then confirm the part number and vehicle fitment before ordering.

Lowest aftermarket price

€27.30

plus €6.95 shipping to Germany, on AUTODOC

Compare 3 listings

Repair guide: How to replace brake discs

Compare offers

What each marketplace’s search lists for this number, lowest price first, Ovoko last. Listings can include other parts that name it.

AUTODOC

3 listings

New

Checked 2026-05-15 13:53 UTCAftermarket parts whose suppliers list this OE number, not the original part.

€27.30 – €44.95Cheapest listing: RIDEX 82B0714+ €6.95 shipping to GermanyView on AUTODOC

Ovoko

No listings

Used

Checked 2026-10-16 23:31 UTC

View on Ovoko

We may earn a commission through partner links. How we stay useful

Aftermarket part numbers

Supplier articles whose catalogue lists 34 21 1 164 129. Check the supplier’s own restrictions before ordering. A fitment condition under a part number is one its supplier names for at least one of the vehicles the part is listed for, not for all of them: a vehicle’s page shows which apply to it.

What these parts’ suppliers state

Each value belongs to the part number beside it, not to the OE number: parts that list one OE number can differ. Where your vehicle manufacturer gives a value, it takes precedence.

Specification	Value and the part numbers stating it
Fitting position	Rear Axle AISIN W6R1542S, ATE 24.0110-0227.1, ATE 24.0310-0227.1, BREMBO 08.6917.10, BREMBO 08.6917.11, BREMBO 08.6917.75 +25 rear axle BLUE_PRINT ADB114391, FEBI 12325
Brake Disc Type	solid AISIN W6R1542S, ATE 24.0110-0227.1, ATE 24.0310-0227.1, BLUE_PRINT ADB114391, CHAMPION 562062CH, DELPHI BG3044 +25 Solid BREMBO 08.6917.10, BREMBO 08.6917.11, BREMBO 08.6917.75, MEYLE 315 523 0040, MEYLE 315 523 0040/PD Perforated ZIMMERMANN 150.1285.52
Brake Disc Thickness	10 mm AISIN W6R1542S, ATE 24.0110-0227.1, ATE 24.0310-0227.1, BLUE_PRINT ADB114391, CHAMPION 562062CH, DELPHI BG3044 +25 10,0 mm LEMFÖRDER 27220 01 9.9 mm STELLOX 6020-1537K-SX
Minimum thickness	8.4 mm AISIN W6R1542S, ATE 24.0110-0227.1, CHAMPION 562062CH, FERODO DDF835C, HELLA 8DD 355 127-271, JURID 562062JC +13 8,4 mm LEMFÖRDER 27220 01, MEYLE 315 523 0040, MEYLE 315 523 0040/PD, TRW DF2768, VAICO V20-40029, VAICO V20-90004 8 mm FTE 9072151, FTE 9082047 7.6 mm ATE 24.0310-0227.1
Minimum Thickness of Brake Disc	8,4 mm BLUE_PRINT ADB114391, FEBI 12325
Outer Diameter	298 mm ATE 24.0110-0227.1, ATE 24.0310-0227.1, BLUE_PRINT ADB114391, CHAMPION 562062CH, DELPHI BG3044, FEBI 12325 +25 297.7 mm AISIN W6R1542S 298,0 mm LEMFÖRDER 27220 01
Height	61 mm AISIN W6R1542S, ATE 24.0110-0227.1, ATE 24.0310-0227.1, CHAMPION 562062CH, DELPHI BG3044, FERODO DDF835C +22 61,0 mm LEMFÖRDER 27220 01
Centering Diameter	75 mm AISIN W6R1542S, ATE 24.0110-0227.1, ATE 24.0310-0227.1, CHAMPION 562062CH, DELPHI BG3044, FERODO DDF835C +19 75.1 mm METZGER AUTOTEILE 6110322
Centre Diameter	75 mm BLUE_PRINT ADB114391, FEBI 12325
Rim Hole Number	5 -Hole FTE 9072151, FTE 9082047, RAICAM RD00062, VALEO 186568, VALEO 673368, ZIMMERMANN 150.1285.20 +1 5 VAICO V20-40029, VAICO V20-90004
Number of holes	5 AISIN W6R1542S, ATE 24.0110-0227.1, ATE 24.0310-0227.1, CHAMPION 562062CH, DELPHI BG3044, FERODO DDF835C +13
No. of Wheel Bolt/Stud Holes	5 BLUE_PRINT ADB114391, FEBI 12325
Bolt Hole Circle Ø	120 mm AISIN W6R1542S, ATE 24.0110-0227.1, ATE 24.0310-0227.1, CHAMPION 562062CH, DELPHI BG3044, FTE 9072151 +12 120.3 mm METZGER AUTOTEILE 6110322 75 mm MAGNETI MARELLI 360406016401
Pitch Circle Diameter	120 mm BLUE_PRINT ADB114391, FEBI 12325
Surface	Coated AISIN W6R1542S, ATE 24.0110-0227.1, ATE 24.0310-0227.1, BLUE_PRINT ADB114391, FEBI 12325, FERODO DDF835C +6 painted METZGER AUTOTEILE 6110322, TRW DF2768 Cross-hatch METZGER AUTOTEILE 6110322 Oiled DELPHI BG3044 UV paint coated MAGNETI MARELLI 360406016401 Zink flake coated MEYLE 315 523 0040/PD
Processing	High-carbon ATE 24.0110-0227.1, ATE 24.0310-0227.1, HELLA 8DD 355 127-271, MAGNETI MARELLI 360406016401, TRW DF2768, ZIMMERMANN 150.1285.20 +1
Test Mark	ECE-R90 FTE 9072151, FTE 9082047, VALEO 673368 K.B.A.: 61210 KAWE 6554 00, ROADHOUSE 6554.00, WOKING D6554.00 R90 Homologated DELPHI BG3044, FERODO DDF835C, JURID 562062JC ECE R90 APPROVED ZIMMERMANN 150.1285.20, ZIMMERMANN 150.1285.52 E1 90R-02 C0204/0562 TRW DF2768 E1 90R-02C0248/0981 ATE 24.0110-0227.1 E1 90R-02C0962/1291 ATE 24.0310-0227.1
Supplementary Article/Supplementary Info 2	with bolts/screws ATE 24.0110-0227.1, ATE 24.0310-0227.1, FERODO DDF835C, JURID 562062JC, MAGNETI MARELLI 360406016401, METZGER AUTOTEILE 6110322 +2 without bolts/screws CHAMPION 562062CH, STELLOX 6020-1537-SX, VALEO 186568, VALEO 673368 without ABS sensor ring VALEO 186568, VALEO 673368 without integrated wheel bearing VALEO 186568, VALEO 673368 without wheel bearing HELLA 8DD 355 127-271 without wheel hub HELLA 8DD 355 127-271 without wheel studs HELLA 8DD 355 127-271

AISIN: W6R1542SBrake Disc Type: solid Surface: Coated Outer Diameter: 297.7 mm Brake Disc Thickness: 10 mm Height: 61 mm Centering Diameter: 75 mm Minimum thickness: 8.4 mm Weight: 4.97 kg Number of Holes: 5 Bolt Hole Circle Ø: 120 mm
+7 moreShow fewer
Fitting position: Rear AxleFitment conditions:Special Purpose Vehicle: for armoured vehicles, not for armoured vehicles Vehicle Equipment: for vehicles without sports package
ATE: 24.0110-0227.1Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Minimum thickness: 8.4 mm Brake Disc Type: solid Number of Holes: 5 Processing: High-carbon Surface: Coated Bolt Hole Circle Ø: 120 mm Height: 61 mm Centering Diameter: 75 mm Inner Diameter: 185 mm Bore Diameter: 14.5 mm Supplementary Article/Supplementary Info 2: with bolts/screws Test Mark: E1 90R-02C0248/0981
+11 moreShow fewer
Fitting position: Rear AxleFitment conditions:Special Purpose Vehicle: not for government vehicles Construction Year from: 12.1995, 02.1996, 03.1996, 04.2000 Construction Year to: 08.1998, 09.200024.0310-0227.1Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Minimum thickness: 7.6 mm Brake Disc Type: solid Number of Holes: 5 Processing: High-carbon Surface: Coated Bolt Hole Circle Ø: 120 mm Height: 61 mm Centering Diameter: 75 mm Inner Diameter: 185 mm Bore Diameter: 14.5 mm Supplementary Article/Supplementary Info 2: with bolts/screws Test Mark: E1 90R-02C0962/1291
+11 moreShow fewer
Fitting position: Rear AxleFitment conditions:Special Purpose Vehicle: not for government vehicles Construction Year from: 12.1995, 02.1996, 03.1996, 04.2000 Construction Year to: 08.1998, 09.2000
BLUE_PRINT: ADB114391Brake Disc Thickness: 10 mm Brake Disc Type: solid Centre Diameter: 75 mm Height or Thickness: 61 mm Minimum Thickness of Brake Disc: 8,4 mm No. of Fixing Holes: 1 No. of Wheel Bolt/Stud Holes: 5 Outer Diameter: 298 mm Pitch Circle Diameter: 120 mm Surface: Coated
+7 moreShow fewer
Fitting position: rear axleFitment conditions:Special Purpose Vehicle: not for government vehicles
BREMBO: 08.6917.10Diameter Ø: 298 mm Thickness (TH): 10 mm Height (A): 61 mm Number of holes (C): 5 Brake disc type: Solid Centering (B): 75 mm Min. thickness: 8,4 mm Tightening torque: 120 Nm Units per box: 2
+6 moreShow fewer
Fitting position: Rear Axle08.6917.11Diameter Ø: 298 mm Thickness (TH): 10 mm Height (A): 61 mm Number of holes (C): 5 Brake disc type: Solid Centering (B): 75 mm Min. thickness: 8,4 mm Tightening torque: 120 Nm Units per box: 2
+6 moreShow fewer
Fitting position: Rear Axle08.6917.75Diameter Ø: 298 mm Thickness (TH): 10 mm Height (A): 61 mm Number of holes (C): 5 Brake disc type: Solid Centering (B): 75 mm Min. thickness: 8,4 mm Tightening torque: 120 Nm Units per box: 2
+6 moreShow fewer
Fitting position: Rear Axle
CHAMPION: 562062CHBrake Disc Type: solid Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Supplementary Article/Supplementary Info 2: without bolts/screws Height: 61 mm Bolt Hole Circle Ø: 120 mm Centering Diameter: 75 mm Number of Holes: 5 Quantity Unit: Set Weight: 10.26 kg Minimum thickness: 8.4 mm Tightening Torque: 120 Nm Container Type: Carton Packaging length: 29.9 cm Packaging width: 29.9 cm Packaging height: 12.6 cm
+13 moreShow fewer
Fitting position: Rear AxleFitment conditions:Special Purpose Vehicle: for armoured vehicles, not for armoured vehicles Vehicle Equipment: for vehicles without sports package
DELPHI: BG3044Brake Disc Type: solid Number of Holes: 5 Test Mark: R90 Homologated Surface: Oiled Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Bolt Hole Circle Ø: 120 mm Centering Diameter: 75 mm Height: 61 mm
+6 moreShow fewer
FEBI: 12325Brake Disc Thickness: 10 mm Brake Disc Type: solid Centre Diameter: 75 mm Height or Thickness: 61 mm Minimum Thickness of Brake Disc: 8,4 mm No. of Fixing Holes: 1 No. of Wheel Bolt/Stud Holes: 5 Outer Diameter: 298 mm Pitch Circle Diameter: 120 mm Surface: Coated
+7 moreShow fewer
Fitting position: rear axleFitment conditions:Special Purpose Vehicle: not for government vehicles
FERODO: DDF835CBrake Disc Type: solid Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Supplementary Article/Supplementary Info 2: with bolts/screws Height: 61 mm Centering Diameter: 75 mm Number of Holes: 5 Quantity Unit: Piece Surface: Coated Test Mark: R90 Homologated Weight: 5.13 kg Minimum thickness: 8.4 mm Tightening Torque: 120 Nm Packaging length: 31 cm Packaging width: 31 cm Packaging height: 15 cm
+13 moreShow fewer
Fitting position: Rear AxleFitment conditions:Special Purpose Vehicle: for armoured vehicles, not for armoured vehicles Vehicle Equipment: for vehicles without sports package
FTE: 9072151Brake Disc Type: solid Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Centering Diameter: 75 mm Height: 61 mm Minimum thickness: 8 mm Bolt Hole Circle Ø: 120 mm Rim Hole Number: 5 -Hole Number of mounting bores: 1 Test Mark: ECE-R90 Weight: 5.118 kg
+8 moreShow fewer
Fitting position: Rear AxleFitment conditions:Construction Year to: 04.2003 Special Purpose Vehicle: for armoured vehicles, not for armoured vehicles Vehicle Equipment: for vehicles without sports packagereplaced by FTE 90820479082047Brake Disc Type: solid Surface: Coated Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Centering Diameter: 75 mm Height: 61 mm Minimum thickness: 8 mm Bolt Hole Circle Ø: 120 mm Rim Hole Number: 5 -Hole Test Mark: ECE-R90 Weight: 5.118 kg
+8 moreShow fewer
Fitting position: Rear AxleFitment conditions:Construction Year to: 04.2003 Special Purpose Vehicle: for armoured vehicles, not for armoured vehicles Vehicle Equipment: for vehicles without sports packagereplaces FTE 9072151
HELLA: 8DD 355 127-271Brake Disc Type: solid Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Height: 61 mm Minimum thickness: 8.4 mm Processing: High-carbon Surface: Coated Inner Diameter: 185.1 mm Bolt Hole Circle Ø: 120 mm Centering Diameter: 75 mm Hole Arrangement/Number: 05/06 Wheel Bolt Bore Diameter: 14.6 mm Supplementary Article/Supplementary Info 2: without wheel hub Supplementary Article/Supplementary Info 2: without wheel bearing Supplementary Article/Supplementary Info 2: without wheel studs Weight: 5.1 kg
+13 moreShow fewer
Fitting position: Rear AxleFitment conditions:Special Purpose Vehicle: not for government vehicles Payload: not for increased payload
JURID: 562062JCBrake Disc Type: solid Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Required quantity: 1 Supplementary Article/Supplementary Info 2: with bolts/screws Version: JC Height: 61 mm Bolt Hole Circle Ø: 120 mm Centering Diameter: 75 mm Number of Holes: 5 Quantity Unit: Set Surface: Coated Test Mark: R90 Homologated Weight: 10.26 kg Minimum thickness: 8.4 mm Tightening Torque: 120 Nm Container Type: Carton Packaging length: 31 cm Packaging width: 31 cm Packaging height: 17 cm
+17 moreShow fewer
Fitting position: Rear AxleFitment conditions:Special Purpose Vehicle: for armoured vehicles, not for armoured vehicles Vehicle Equipment: for vehicles without sports package
KAWE: 6554 00Diameter: 298 mm Weight: 5 kg Brake Disc Type: solid Minimum thickness: 8.4 mm Brake Disc Thickness: 10 mm Number of Holes: 5 Test Mark: K.B.A.: 61210 Height: 61 mm Centering Diameter: 75 mm Outer Diameter: 298 mm
+7 moreShow fewer
Fitting position: Rear AxleFitment conditions:Braking/Driving Dynamics: for vehicles with ABS Construction Year to: 08.1998
LEMFÖRDER: 24795 02Brake Disc Type: solid Outer Diameter: 298 mm Brake Disc Thickness: 10 mmFitting position: Rear AxleFitment conditions:Construction Year to: 199809replaced by LEMFÖRDER 27220 0127220 01Brake Disc Type: solid Outer Diameter: 298,0 mm Brake Disc Thickness: 10,0 mm Minimum thickness: 8,4 mm Height: 61,0 mm Hole Arrangement/Number: 05/05
+3 moreShow fewer
Fitting position: Rear AxleFitment conditions:Construction Year from: 199512, 199602, 199603, 200004 Construction Year to: 199808
MAGNETI MARELLI: 360406016401Processing: High-carbon Surface: UV paint coated Brake Disc Type: solid Diameter: 298 mm Height: 61 mm Minimum thickness: 8.4 mm Number of Holes: 5 Bolt Hole Circle Ø: 75 mm Tightening Torque: 120 Nm Supplementary Article/Supplementary Info 2: with bolts/screws Brake Disc Thickness: 10 mm Outer Diameter: 298 mm
+9 moreShow fewer
Fitting position: Rear AxleFitment conditions:Construction Year to: 08.1998
METZGER AUTOTEILE: 6110322Brake Disc Type: solid Surface: painted Surface: Cross-hatch Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Minimum thickness: 8.4 mm Number of Holes: 5 Bolt Hole Circle Ø: 120.3 mm Height: 61 mm Centering Diameter: 75.1 mm Inner Diameter: 155 mm Supplementary Article/Supplementary Info 2: with bolts/screws
+9 moreShow fewer
Fitting position: Rear AxleFitment conditions:for model code/type code: DD11, DD12, DD21, DD22, DD31, DD32, DD41, DD42, DF51, DF71, DF72, DF81, DF82, DM11, DM12, DM21, DM22, DM31, DM32, DM41, DM42, DM71, DT11, DT12, DT21, DT22 not for special equipment code: S100A, S102A Payload: not for increased payload Special Purpose Vehicle: not for government vehicles
+1 moreShow fewer
MEYLE: 315 523 0040Outer Diameter: 298 mm Height: 61 mm Brake Disc Thickness: 10 mm Centering Diameter: 75 mm Bolt Hole Circle Ø: 120 mm Wheel Bolt Bore Diameter: 14,5 mm Number of Holes: 5 Brake Disc Type: Solid Required quantity: 2 Minimum thickness: 8,4 mm
+7 moreShow fewer
Fitting position: Rear Axle315 523 0040/PDOuter Diameter: 298 mm Height: 61 mm Brake Disc Thickness: 10 mm Centering Diameter: 75 mm Bolt Hole Circle Ø: 120 mm Wheel Bolt Bore Diameter: 14,5 mm Number of Holes: 5 Brake Disc Type: Solid Surface: Zink flake coated Supplementary Article/Supplementary Info 2: with bolts/screws Quality: PREMIUM Required quantity: 2 Minimum thickness: 8,4 mm
+10 moreShow fewer
Fitting position: Rear Axle
RAICAM: RD00062Minimum thickness: 8.4 mm Height: 61 mm Outer Diameter: 298 mm Weight: 5 kg Centering Diameter: 75 mm Brake Disc Type: solid fulfils ECE standard: E1 Rim Hole Number: 5 -Hole Brake Disc Thickness: 10 mm
+6 moreShow fewer
Fitting position: Rear AxleFitment conditions:for OE number: 34216767049 Special Purpose Vehicle: for armoured vehicles, not for armoured vehicles Vehicle Equipment: for vehicles without sports package
REMSA: 6554.00Diameter: 298 mm Height: 61 mm Brake Disc Type: solid Brake Disc Thickness: 10 mm Minimum thickness: 8.4 mm Number of Holes: 5 Centering Diameter: 75 mm Weight: 5 kg Outer Diameter: 298 mm
+6 moreShow fewer
Fitting position: Rear AxleFitment conditions:Braking/Driving Dynamics: for vehicles with ABS
ROADHOUSE: 6554.00Test Mark: K.B.A.: 61210 Weight: 5 kg Diameter: 298 mm Brake Disc Thickness: 10 mm Minimum thickness: 8.4 mm Height: 61 mm Centering Diameter: 75 mm Number of Holes: 5 Brake Disc Type: solid Outer Diameter: 298 mm
+7 moreShow fewer
Fitting position: Rear AxleFitment conditions:Braking/Driving Dynamics: for vehicles with ABS Construction Year to: 08.1998
STELLOX: 6020-1537K-SXOuter Diameter: 298 mm Brake Disc Thickness: 9.9 mm Brake Disc Type: solidFitting position: Rear AxleFitment conditions:Special Purpose Vehicle: not for government vehicles6020-1537-SXOuter Diameter: 298 mm Brake Disc Thickness: 10 mm Height: 61 mm Centering Diameter: 75 mm Number of Holes: 5 Bolt Hole Circle Ø: 120 mm Bore Diameter: 14.5 mm Minimum thickness: 8.4 mm Brake Disc Type: solid Supplementary Article/Supplementary Info 2: without bolts/screws
+7 moreShow fewer
Fitting position: Rear AxleFitment conditions:Special Purpose Vehicle: not for government vehicles Construction Year from: 12.1995, 02.1996, 03.1996, 04.2000 Braking/Driving Dynamics: for vehicles with ABS Construction Year to: 08.1998
+1 moreShow fewer
TRW: DF2768Brake Disc Type: solid Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Minimum thickness: 8,4 mm Centering Diameter: 75 mm Height: 61 mm Number of Holes: 5 Thread Size: 14,6 Bolt Hole Circle Ø: 120 mm Drum diameter: 185 mm Colour: black Processing: High-carbon Surface: painted Test Mark: E1 90R-02 C0204/0562
+11 moreShow fewer
Fitting position: Rear AxleFitment conditions:Suspension: for vehicles without sports suspension
VAICO: V20-40029Rim Hole Number: 5 Height: 61 mm Brake Disc Type: solid Brake Disc Thickness: 10 mm Outer diameter: 298 mm Centering Diameter: 75 mm Bolt Hole Circle Ø: 120 mm Brake Disc Hub Height: 51,1 mm Minimum thickness: 8,4 mm
+6 moreShow fewer
V20-90004Outer diameter: 298 mm Brake Disc Type: solid Brake Disc Thickness: 10 mm Centering Diameter: 75 mm Rim Hole Number: 5 Height: 61 mm Bolt Hole Circle Ø: 120 mm Supplementary Article/Info 2: with brake pads Wear Warning Contact: incl. wear warning contact Bore Ø: 14,5 mm Number of Holes: 5 Bore Ø 1: 14,65 mm Minimum thickness: 8,4 mm Inner diameter: 185 mm Bore Ø 2: 12,7 mm
+12 moreShow fewer
VALEO: 186568Brake Disc Type: solid Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Centering Diameter: 75 mm Height: 61 mm Minimum thickness: 8.4 mm Rim Hole Number: 5 -Hole Number of mounting bores: 1 Supplementary Article/Supplementary Info 2: without bolts/screws Supplementary Article/Supplementary Info 2: without ABS sensor ring Supplementary Article/Supplementary Info 2: without integrated wheel bearing Weight: 10.19 kg
+9 moreShow fewer
Fitting position: Rear AxleFitment conditions:Construction Year to: 04.2003 Special Purpose Vehicle: for armoured vehicles, not for armoured vehicles Vehicle Equipment: for vehicles without sports package673368Brake Disc Type: solid Surface: Coated Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Height: 61 mm Minimum thickness: 8.4 mm Rim Hole Number: 5 -Hole Number of mounting bores: 1 Supplementary Article/Supplementary Info 2: without bolts/screws Supplementary Article/Supplementary Info 2: without ABS sensor ring Supplementary Article/Supplementary Info 2: without integrated wheel bearing Test Mark: ECE-R90 Weight: 10.49 kg
+10 moreShow fewer
Fitting position: Rear AxleFitment conditions:Construction Year to: 04.2003 Special Purpose Vehicle: for armoured vehicles, not for armoured vehicles Vehicle Equipment: for vehicles without sports package
WOKING: D6554.00Test Mark: K.B.A.: 61210 Diameter: 298 mm Brake Disc Thickness: 10 mm Minimum thickness: 8.4 mm Height: 61 mm Centering Diameter: 75 mm Number of Holes: 5 Brake Disc Type: solid Weight: 5 kg Outer Diameter: 298 mm
+7 moreShow fewer
Fitting position: Rear AxleFitment conditions:Braking/Driving Dynamics: for vehicles with ABS Construction Year to: 08.1998
ZentParts: Z06296Supplementary Article/Supplementary Info 2: with bolts/screws Brake Disc Type: solid Centering Diameter: 75 mm Bolt Hole Circle Ø: 120 mm Brake Disc Thickness: 10 mm Number of Holes: 5 Minimum thickness: 8.4 mm Height: 61 mm Bore Diameter: 14.5 mm Outer Diameter: 298 mm
+7 moreShow fewer
Fitting position: Rear Axle
ZIMMERMANN: 150.1285.20Brake Disc Type: solid Processing: High-carbon Surface: Coated Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Height: 61 mm Rim Hole Number: 5 -Hole Bolt Hole Circle Ø: 120 mm Centering Diameter: 75 mm Test Mark: ECE R90 APPROVED Minimum thickness: 8.4 mm Hole Arrangement/Number: 6/5 Weight: 4.82 kg
+10 moreShow fewer
Fitting position: Rear AxleFitment conditions:Special Purpose Vehicle: not for government vehicles150.1285.52Brake Disc Type: solid Brake Disc Type: Perforated Processing: High-carbon Surface: Coated Outer Diameter: 298 mm Brake Disc Thickness: 10 mm Height: 61 mm Rim Hole Number: 5 -Hole Bolt Hole Circle Ø: 120 mm Centering Diameter: 75 mm Test Mark: ECE R90 APPROVED Minimum thickness: 8.4 mm Hole Arrangement/Number: 6/5 Weight: 4.82 kg
+11 moreShow fewer
Fitting position: Rear AxleFitment conditions:Special Purpose Vehicle: not for government vehicles

Vehicle fitment

Engine code and production dates decide fitment. Model name and year alone don’t.

18 vehicles in 1 model series, inferred

Aftermarket parts that list 34 21 1 164 129 fit these vehicles according to their supplier catalogues. That does not prove 34 21 1 164 129 itself fits every one: check the engine code, production dates and the supplier’s restrictions on the model series’ vehicle pages.

BMW

1 model series · 18 vehicles

BMW model series inferred from aftermarket parts
Model series	Production	Engine codes	HSN / TSN
5 (E39)18 vehicles	09/1995 – 05/2004	25 6T 1, M47, M51, M52, M54, M57	0005 / 567, 569, 570, 601, 602, 604, 607, 613, 615, 616, 670, 671, 672, 673, 688, 689, 690, 692, 693