Citroën and Peugeot OE number, as listed in aftermarket supplier catalogues. Compare listings for this exact number, then confirm the part number and vehicle fitment before ordering.
Supplier articles whose catalogue lists 2050 08. Check the supplier’s own restrictions before ordering. A fitment condition under a part number is one its supplier names for at least one of the vehicles the part is listed for, not for all of them: a vehicle’s page shows which apply to it.
What these parts’ suppliers state
Each value belongs to the part number beside it, not to the OE number: parts that list one OE number can differ. Where your vehicle manufacturer gives a value, it takes precedence.
Specification
Value and the part numbers stating it
Clutch
for vehicles with push type clutchVALEO 801289
Supplementary Article/Supplementary Info
with clutch pressure plateKAWE 957016, RYMEC JT6209
with synthetic greaseRYMEC JT6209
Supplementary Article/Supplementary Info 2
with clutch release bearingKAWE 957016, RYMEC JT6209, VALEO 801289
with clutch discKAWE 957016, RYMEC JT6209
Clutch Pressure Plate Outer Diameter
180 mmRYMEC JT6209, VALEO 801289
Diameter
180 mmKAWE 957016
Number of Teeth
18RYMEC JT6209, SACHS 3000 560 001, VALEO 801289
Hub Profile
18.5x20.9RYMEC JT6209
20,97 x 18,2VALEO 801289
21 x 18KAWE 957016
KAWE
957016Diameter: 180 mmHub Profile: 21 x 18Supplementary Article/Supplementary Info: with clutch pressure plateSupplementary Article/Supplementary Info 2: with clutch discSupplementary Article/Supplementary Info 2: with clutch release bearing+2 moreShow fewer
RYMEC
JT6209Multi-piece: three-pieceNumber of Teeth: 18Hub Profile: 18.5x20.9Supplementary Article/Supplementary Info: with clutch pressure plateSupplementary Article/Supplementary Info: with synthetic greaseSupplementary Article/Supplementary Info 2: with clutch discSupplementary Article/Supplementary Info 2: with clutch release bearingClutch Pressure Plate Outer Diameter: 180 mmFriction Lining Outer Diameter 1: 180 mm+6 moreShow fewerreplaces RYMEC JT9100
SACHS
3000 560 001Diameter [mm]: 180Number of Teeth: 18Warranty: 3 years warranty
VALEO
801289Clutch Pressure Plate Outer Diameter: 180 mmNumber of Teeth: 18Hub Profile: 20,97 x 18,2Supplementary Article/Supplementary Info 2: with clutch release bearingHeight of clutch release bearing: 20.5 mmClutch: for vehicles with push type clutchWeight: 3.58 kg+4 moreShow fewerFitment conditions:Engine Code: KFZ (TU3FJ2/Z), TU2J2Transmission Type: 5-Speed Manual TransmissionConstruction Year to: 03.1996, 07.1996Transmission Code: MA5,MA/5+1 moreShow fewerreplaces VALEO 801021
Related OE numbers
Numbers listed on the same aftermarket parts as 2050 08, most shared first. A shared part is not a fitment guarantee.
Engine code and production dates decide fitment. Model name and year alone don’t.
7 vehicles in 4 model series, inferred
Aftermarket parts that list 2050 08 fit these vehicles according to their supplier catalogues. That does not prove 2050 08 itself fits every one: check the engine code, production dates and the supplier’s restrictions on the model series’ vehicle pages.
Citroën
2 model series · 5 vehicles
Citroën model series inferred from aftermarket parts