Piston0628 W2

Aftermarket part numbers

Supplier articles whose catalogue lists 0628 W2. Check the supplier’s own restrictions before ordering. A fitment condition under a part number is one its supplier names for at least one of the vehicles the part is listed for, not for all of them: a vehicle’s page shows which apply to it.

ARCO

PTPG407372DA 0.00Cylinder Bore: 73.7 mm Length: 65.44 mm Compression Height: 42.94 mm Recess Diameter: 45 mm Recess Depth 1: 12.5 mm Bolt Head Diameter: 25 mm Bolt Length: 60 mm Surface: Molybdenum coated Supplementary Article/Supplementary Info 2: with piston ring carrier Connecting Rod Design: Trapezoidal Connecting Rod Component Number: 1- 2.5K Component Number: 2- 1.95 Component Number: 3- 2.0

+10 moreShow fewer

MAHLE

039 PI 00125 000Cylinder Bore: 73.7 mm Length: 65.4 mm Compression Height: 42.95 mm Bolt Length: 60 mm Bolt Head Diameter: 25 mm Recess Depth 1: 12.4 mm Recess Diameter: 45 mm Machined: with cut-out for oil jet Surface: Coated Supplementary Article/Supplementary Info 2: with piston ring carrier Supplementary Article/Supplementary Info 2: without cooling duct Top Land Height: 7.3 mm Connecting Rod Design: Trapezoidal Connecting Rod Production Number: 73 L 69 Piston Clearance: 0.06 mm Component Number: 1. T 2.5 CrK Component Number: 2. M 1.95 IFU Component Number: 3. DSF 2.00 Cr Packaging height: 12.8 cm Net Weight: 586 g Packaging length: 9.5 cm Packaging width: 9.5 cm Weight: 672 g

+20 moreShow fewer

Fitment conditions:Engine Code: 8HR (DV4C)

NÜRAL

87-449800-00Supplementary Article/Supplementary Info 2: with piston ring carrier Supplementary Article/Supplementary Info 2: for keystone connecting rod Recess Depth 1: 12.5 mm Compression Height: 42.9 mm Height: 65.4 mm Cylinder Bore: 73.7 mm Bolt Head Diameter: 25 mm Recess Diameter: 45.1 mm Bolt Length: 60 mm Component Number: 08-449800-00 Machined: with cut-out for oil jet

+8 moreShow fewer

Fitment conditions:Engine Code: 8HP (DV4C), 8HR (DV4C)