Flywheel028105266D

Aftermarket part numbers

Supplier articles whose catalogue lists 028105266D. Check the supplier’s own restrictions before ordering. A fitment condition under a part number is one its supplier names for at least one of the vehicles the part is listed for, not for all of them: a vehicle’s page shows which apply to it.

AISIN

FDE-VG59SKE-VW18

BLUE_PRINT

ADV183061Additional Information / Parts: with bolts Additional Information / Parts: with clutch release bearing Additional Information / Parts: with flywheel bolts Additional Information / Parts: with high performance clutch grease Clutch Kit Type: 4 piece (RB & SMF) No. of Teeth: 24 Outer Diameter: 190 mm

+4 moreShow fewer

Fitment conditions:Construction Year to: 05/1999 suitable for engine code: AEF Transmission ID: CWT, DCH, DXF

KAWE

DMF073Engine Features/Arrangement: for engines with dual-mass flywheel Transmission Type: Manual Transmission Vehicle Equipment: for vehicles with manual transmission Supplementary Article/Supplementary Info: without pilot bearing Supplementary Article/Supplementary Info 2: without screw set Supplementary Article/Supplementary Info 2: Dual-mass flywheel with friction control plate Number of mounting bores: 8

+4 moreShow fewer

DMV167MClutch: Conversion from dual-mass flywheel to single-mass flywheel Diameter: 190 mm Supplementary Article/Supplementary Info 2: with clutch disc Supplementary Article/Supplementary Info 2: with clutch release bearing Supplementary Article/Supplementary Info 2: with flywheel Supplementary Article/Supplementary Info 2: with bolts Supplementary Article/Supplementary Info: with clutch pressure plate Hub Profile: 20 x 24

+5 moreShow fewer

Fitment conditions:Engine Code: AEF, AGD, AHG, AKU, ASX Transmission Code: CWT,DCH, DED, DED,DPX, DED,DXQ,ETF,FFG, DPX, DXF, DXQ,ETF, ETF Transmission Type: Manual Transmission Construction Year from: 02.1998, 03.1998, 10.1998 Construction Year to: 05.1999, 04.2000, 07.2001, 05.2003, 10.2003 Engine Number from: 007 001, 008 701, 011 501

+3 moreShow fewer

SACHS

2290 601 012Diameter [mm]: 180 Number of Teeth: 24 Mounting Type: not pre-assembled Supplementary Article/Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws Supplementary Article/Supplementary Info 2: with clutch disc, with clutch release bearing Warranty: 3 years warranty

+3 moreShow fewer

2294 501 031Outer Diameter: 180 mm Engine Features/Arrangement: for engines with dual-mass flywheel Supplementary Article/Supplementary Info: with flywheel screws Warranty: 3 years warranty

+1 moreShow fewer

VALEO

826551Supplementary Article/Supplementary Info: with single-mass flywheel Clutch: Conversion from dual-mass flywheel to single-mass flywheel Tightening Torque: 60 Nm Tightening angle [degrees]: 90 ° Clutch Pressure Plate Outer Diameter: 190 mm Number of Teeth: 24 Hub Profile: 20,1 x 18,2 Supplementary Article/Supplementary Info 2: with clutch release bearing Clutch: for vehicles with push type clutch Weight: 11.772 kg

+7 moreShow fewer

Fitment conditions:Construction Year to: 05.1999, 07.2001 Engine Code: AEF Transmission Code: CWT,DCH, DXF Transmission Type: 5-Speed Manual Transmission

+1 moreShow fewer

836818Weight: 10 kgFitment conditions:Engine Code: AEF