Clutch Kit000 141 165

Volkswagen OE number, as listed in aftermarket supplier catalogues. Compare listings for this exact number, then confirm the part number and vehicle fitment before ordering.

Marketplace offers

No marketplace lists this number right now.

See marketplaces

Repair guide: How to replace the clutch of a manual transmission

Compare offers

What each marketplace’s search lists for this number, lowest price first, Ovoko last. Listings can include other parts that name it.

AUTODOC

Prices not checked

New

View on AUTODOC

Ovoko

No listings

Used

Checked 2026-10-15 19:17 UTC

View on Ovoko

We may earn a commission through partner links. How we stay useful

Aftermarket part numbers

Supplier articles whose catalogue lists 000 141 165. Check the supplier’s own restrictions before ordering. A fitment condition under a part number is one its supplier names for at least one of the vehicles the part is listed for, not for all of them: a vehicle’s page shows which apply to it.

What these parts’ suppliers state

Each value belongs to the part number beside it, not to the OE number: parts that list one OE number can differ. Where your vehicle manufacturer gives a value, it takes precedence.

Specification	Value and the part numbers stating it
Clutch	for vehicles with push type clutch VALEO 826678
Clutch Type	clutch disc with torsion springs SACHS 3000 951 205
Supplementary Article/Supplementary Info	with clutch pressure plate RYMEC JT1101, RYMEC JT1114, RYMEC JT1519, RYMEC JT6777 with synthetic grease RYMEC JT1101, RYMEC JT1114, RYMEC JT1519, RYMEC JT6777 with clutch pressure plate, with dual-mass flywheel, with flywheel screws SACHS 2290 601 007 with dual-mass flywheel VALEO 837053 with flywheel screws VALEO 837053 with pressure plate screws VALEO 837053
Supplementary Article/Supplementary Info 2	with clutch release bearing RYMEC JT1101, RYMEC JT1114, RYMEC JT1519, RYMEC JT6777, VALEO 826290, VALEO 826452 +3 with clutch disc RYMEC JT1101, RYMEC JT1114, RYMEC JT1519, RYMEC JT6777 with clutch disc, with clutch release bearing SACHS 2290 601 007
Clutch Pressure Plate Outer Diameter	240 mm RYMEC JT1101, RYMEC JT1114, RYMEC JT1519, RYMEC JT6777, VALEO 826678, VALEO 837053 241 mm VALEO 832195
Number of Teeth	26 RYMEC JT1101, RYMEC JT1114, RYMEC JT1519, RYMEC JT6777, SACHS 2290 601 007, SACHS 3000 317 003 +11 10 SACHS 3000 951 743
Hub Profile	26.5x28.9 RYMEC JT1101, RYMEC JT1114, RYMEC JT1519 26.6x28.9 RYMEC JT6777 28,9 x 26,5 VALEO 826678
Number of mounting bores	8 VALEO 837053
Tightening Torque	60 Nm VALEO 837053
Tightening angle [degrees]	50 ° VALEO 837053

BLUE_PRINT: ADU173302Fitment conditions:Engine Number from: 049 379, 052 610 suitable for engine code: ANJ, AVR
KAWE: 989357Parameter: HKFitment conditions:Engine Code: AUH, BCQ
RYMEC: EQ5692500JT1101Multi-piece: three-piece Number of Teeth: 26 Hub Profile: 26.5x28.9 Supplementary Article/Supplementary Info: with clutch pressure plate Supplementary Article/Supplementary Info: with synthetic grease Supplementary Article/Supplementary Info 2: with clutch disc Supplementary Article/Supplementary Info 2: with clutch release bearing Clutch Pressure Plate Outer Diameter: 240 mm Friction Lining Outer Diameter 1: 240 mm
+6 moreShow fewer
Fitment conditions:Engine Code: ANJ Engine Number from: 049379 Engine Number to: 052609 Vehicle Identification Number (VIN) to: 3#040000 Vehicle type: LT28, LT35, LT46
+2 moreShow fewer
replaces RYMEC JT7560JT1114Multi-piece: three-piece Number of Teeth: 26 Hub Profile: 26.5x28.9 Supplementary Article/Supplementary Info: with clutch pressure plate Supplementary Article/Supplementary Info: with synthetic grease Supplementary Article/Supplementary Info 2: with clutch disc Supplementary Article/Supplementary Info 2: with clutch release bearing Clutch Pressure Plate Outer Diameter: 240 mm Friction Lining Outer Diameter 1: 240 mm
+6 moreShow fewer
Fitment conditions:Engine Code: ANJ, AVR Engine Number from: 052610 Vehicle Identification Number (VIN) from: 4#000001 Vehicle Identification Number (VIN) to: 3#040000
+1 moreShow fewer
JT1519Multi-piece: three-piece Number of Teeth: 26 Hub Profile: 26.5x28.9 Supplementary Article/Supplementary Info: with clutch pressure plate Supplementary Article/Supplementary Info: with synthetic grease Adjustment: with automatic adjustment Supplementary Article/Supplementary Info 2: with clutch disc Supplementary Article/Supplementary Info 2: with clutch release bearing Clutch Pressure Plate Outer Diameter: 240 mm Friction Lining Outer Diameter 1: 240 mm
+7 moreShow fewer
JT6777Multi-piece: three-piece Number of Teeth: 26 Hub Profile: 26.6x28.9 Supplementary Article/Supplementary Info: with clutch pressure plate Supplementary Article/Supplementary Info: with synthetic grease Supplementary Article/Supplementary Info 2: with clutch disc Supplementary Article/Supplementary Info 2: with clutch release bearing Clutch Pressure Plate Outer Diameter: 240 mm Friction Lining Outer Diameter 1: 240 mm
+6 moreShow fewer
SACHS: 2290 601 007Diameter [mm]: 228 Number of Teeth: 26 Mounting Type: not pre-assembled Supplementary Article/Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws Supplementary Article/Supplementary Info 2: with clutch disc, with clutch release bearing Warranty: 3 years warranty
+3 moreShow fewer
3000 317 003Diameter [mm]: 228 Number of Teeth: 26 Warranty: 3 years warranty3000 726 001Diameter [mm]: 228 Number of Teeth: 26 Warranty: 3 years warranty3000 845 101Diameter [mm]: 240 Number of Teeth: 26 Warranty: 3 years warrantyFitment conditions:Engine Number from: 047 379 Vehicle type: LT 28, LT 35, LT 463000 845 801Diameter [mm]: 240 Number of Teeth: 26 Warranty: 3 years warranty3000 951 104Diameter [mm]: 240 Number of Teeth: 26 Warranty: 3 years warrantyFitment conditions:Engine Code: ANJ, AVR Engine Number from: 0526103000 951 205Diameter [mm]: 228 Number of Teeth: 26 Clutch Type: clutch disc with torsion springs Warranty: 3 years warranty
+1 moreShow fewer
3000 951 710Diameter [mm]: 240 Number of Teeth: 26 Warranty: 3 years warrantyFitment conditions:Engine Code: ANJ Engine Number to: 0526093000 951 743Diameter [mm]: 228 Number of Teeth: 10 Warranty: 3 years warranty3151 248 031Parameter: KZIS-0 Warranty: 3 years warrantyFitment conditions:Engine Code: AGK, ATA
STELLOX: 07-00608-SXParameter: KZIS-0Fitment conditions:Engine Code: AGK
VALEO: 826290Number of Teeth: 26 Supplementary Article/Supplementary Info 2: with clutch release bearing Weight: 7.66 kgFitment conditions:Engine Code: AGK, ATA Transmission Code: DDX, DDX,DDY Transmission Type: 5-Speed Manual Transmission Construction Year to: 12.1998, 01.2002
+1 moreShow fewer
826452Number of Teeth: 26 Supplementary Article/Supplementary Info 2: with clutch release bearing Weight: 6.16 kgFitment conditions:Construction Year from: 04.1998 Construction Year to: 08.1998 Engine Code: AHD Engine Number to: 047 378 Transmission Code: DDY Transmission Type: 5-Speed Manual Transmission
+3 moreShow fewer
826678Clutch Pressure Plate Outer Diameter: 240 mm Number of Teeth: 26 Hub Profile: 28,9 x 26,5 Supplementary Article/Supplementary Info 2: with clutch release bearing Clutch: for vehicles with push type clutch Weight: 6.39 kg
+3 moreShow fewer
Fitment conditions:Engine Code: ANJ, AVR, BBE, BBF Transmission Code: DDY, DDY,DKW Transmission Type: 5-Speed Manual Transmission Construction Year from: 06.2003, 01.2004 Engine Number from: 052 610
+2 moreShow fewer
832195Clutch Pressure Plate Outer Diameter: 241 mm Number of Teeth: 26 Supplementary Article/Supplementary Info 2: with clutch release bearing Weight: 4.97 kg
+1 moreShow fewer
Fitment conditions:Construction Year to: 05.1999, 06.2001, 05.2003 Engine Code: AHD, ANJ, APA, BBE, BBF Transmission Code: DDY Transmission Type: 5-Speed Manual Transmission Engine Number to: 052 609 Engine Number from: 047 379
+3 moreShow fewer
replaces VALEO 826518 replaces VALEO 826677837053Supplementary Article/Supplementary Info: with dual-mass flywheel Number of mounting bores: 8 Supplementary Article/Supplementary Info: with flywheel screws Tightening Torque: 60 Nm Tightening angle [degrees]: 50 ° Clutch Pressure Plate Outer Diameter: 240 mm Supplementary Article/Supplementary Info: with pressure plate screws Number of Teeth: 26 Supplementary Article/Supplementary Info 2: with clutch release bearing Weight: 18.6 kg
+7 moreShow fewer
Fitment conditions:Transmission Type: Manual Transmission Engine Code: ANJ, AVR Engine Number from: 052610 Vehicle Identification Number (VIN) to: 3-040 000, 4-000 001
+1 moreShow fewer

Vehicle fitment

Engine code and production dates decide fitment. Model name and year alone don’t.

10 vehicles in 1 model series, inferred

Aftermarket parts that list 000 141 165 fit these vehicles according to their supplier catalogues. That does not prove 000 141 165 itself fits every one: check the engine code, production dates and the supplier’s restrictions on the model series’ vehicle pages.

Volkswagen

1 model series · 10 vehicles

Volkswagen model series inferred from aftermarket parts
Model series	Production	Engine codes	HSN / TSN
LT II (2D)10 vehicles	05/1996 – 07/2006	AGK, AGL, AGX, AHD, ANJ, APA, ATA, AUH, AVR, BBE, BBF, BCQ	0603 / 019, 020, 023, 024, 029, 030, 033, 036, 039, 040, 041, 042, 047, 048, 049, 050, 051, 052, 053, 054, 055, 056, 057, 058, 060, 061, 062, 063, 064, 065, 066, 067, 068, 069, 332, 333, 351, 526, 527, 643, 644, 685

Clutch Kit000 141 165

Compare offers

Prices not checked

No listings

Aftermarket part numbers

What these parts’ suppliers state

Related OE numbers

Vehicle fitment

Volkswagen